Our Cabinet Refinishing Process
The finish coat gets the attention. Preparation is what makes the finished result possible.
A cabinet finish is only as good as the surface underneath it
Cabinets collect cooking residue, hand oils, polish, silicone and ordinary household grime. Existing finishes may also be glossy, damaged or previously repainted. That is why preparation is a system, not a single sanding step.
- Document and label. Doors and drawer fronts are identified so everything returns to the correct opening.
- Protect the kitchen. Floors, counters, appliances and adjacent surfaces are masked or covered as needed.
- Clean and repair. Contaminants are removed and minor defects are addressed before coating.
- Sand and prepare. Surfaces are abraded to promote adhesion and smooth out flaws.
- Prime when required. Primer selection depends on substrate, stains and the existing coating.
- Apply finish coats. Cabinet-grade coatings are applied for an even, smooth appearance.
- Reassemble and inspect. Doors and fronts are installed, aligned and checked.
What homeowners should expect
A professional refinishing project should have a clear scope, protected workspace, realistic cure guidance and a final walkthrough — not mystery steps.
In-home work
Cabinet boxes and fixed components are prepared and finished in place with the surrounding room protected.
Door/front work
Removable components can be prepared and finished separately for better access and control.
Cure and care
Fresh coatings continue to harden after installation. We explain normal use and care so the finish gets the best start.